Angles, beams and profiles in stainless steel

EQUAL-SIDE STAINLESS STEEL ANGLES

hot-rolled, heat-treated, pickled / laser-welded
DIN 17440 / EN 10088-3 – Tolerances DIN 1028, EN 10056-1
Production lengths 6.00 m
Grades: 1.4301/AISI 304, 1.4571/AISI 316Ti, 1.4404/AISI 316L (NEW)
Dimensions: from 15×15×2 mm to 200×200×13 mm

UNEQUAL-SIDE STAINLESS STEEL ANGLES

hot-rolled, heat-treated, pickled / laser-welded
DIN 17440 / EN 10088-3 – Tolerances DIN 1028, EN 10056-1
Production lengths 6.00 m
Grades: 1.4301/AISI 304, 1.4571/AISI 316Ti, 1.4404/AISI 316L (NEW)
Dimensions: from 20×10×3 mm to 200×100×13 mm

T-PROFILES IN STAINLESS STEEL

rolled, laser-welded
DIN 17440 / EN 10088-3 – Tolerances similar to DIN 1024, EN 10055
Production lengths 4.00 – 6.00 m
Grades: 1.4301/AISI 304, 1.4404/AISI 316L, 1.4571/AISI 316Ti, 1.4462/Duplex S31803 (NEW), 1.4539/Alloy 904L (NEW)
Dimensions: from 20×20×3 mm to 100×100×10 mm

U-PROFILES IN STAINLESS STEEL

extruded, hot-rolled, bent or welded – heat-treated, pickled
DIN 17440 / EN 10088-3 – Tolerances DIN 1026 or similar to DIN 1026, EN 10279
Production lengths 4.00 – 6.00 m
Grades: 1.4301/AISI 304, 1.4571/AISI 316Ti, 1.4404/AISI 316L (NEW), 1.4462/Duplex S31803 (NEW)
Dimensions: from 20×10×3×3.50 mm to 200×100×10×10 mm

IPE BEAMS IN STAINLESS STEEL

DIN 17440 / EN 10088-3 – Tolerances similar to DIN 1025-5
Production lengths 4.00 – 6.00 m
Grades: 1.4301/AISI 304, 1.4571/AISI 316Ti, 1.4404/AISI 316L (NEW), 1.4462/Duplex S31803 (NEW)
Dimensions: from 80×46×4×5 mm to 400×180×12×16 mm

IPB BEAMS IN STAINLESS STEEL

DIN 17440 / EN 10088-3 – Tolerances similar to DIN 1025-5
Production lengths 4.00 – 6.00 m
Grades: 1.4301/AISI 304, 1.4571/AISI 316Ti, 1.4404/AISI 316L (NEW), 1.4462/Duplex S31803 (NEW)
Dimensions: from 50×50×4×4 mm to 300×300×10×16 mm