Flanges, fittings, joints, sleeves and valves in stainless steel
STAINLESS STEEL FLANGES ACC. TO DIN / EN 1092 / ASME
Standard grade (AISI 321) + 1.4571 (AISI 316Ti). Other grades on request.
Welding-neck flanges
Blind flanges
Threaded flanges
Loose flanges
Flat welding flanges (slip-on)
Flat collars
Hub shaft ends
Slip-on flanges
CAMLOCK COUPLINGS / QUICK COUPLINGS
Acc. to MIL-C-27487. Thread DIN EN 10226-1:2004 (old DIN 2999). Conical male thread (R) and cylindrical female thread (Rp). Grade: 1.4401 / AISI 316.
Adapter with female thread
Coupling with male thread
Female coupling/connection with hose tail
Female coupling with internal thread
Male adapter with hose tail
Male adapter with external thread
Female and male dust caps
MOUNTING ACCESSORIES
Clamps similar to DIN 3567 Form A without bolts and nuts; lightweight design; 1.4301 (AISI 304)
Clamps acc. to DIN 3567 Form A without bolts and nuts; heavy construction; 1.4301 (AISI 304); 1.4571 (AISI 316Ti); steel (also galvanised)
Ventilation screws and clamps without acoustic insulation in galvanised or stainless steel
Screws (DIN 931) and nuts (DIN 934) for DIN flanges
Gaskets DIN 2690 / EN 1514-1 form IBC DIN 2690 for flanges
COMPRESSION FITTINGS DIN 2353 / EN ISO 8434-1
Straight, angular, T- or K-fittings
Straight with male stud
Angular stud
T-stud
L-stud
Screw straight
Gauges/couplings
Bulkhead couplings and fittings
Weld couplings and fittings
Reducer couplings and fittings
Male stud couplings with adjustable connector
Reducing couplings with adjustable connector
Fitting accessories
Thread reducers
STAINLESS STEEL PRESS FITTINGS WITH EPDM SEALS
Grade AISI 316 / AISI 316 L
Socket type
Sliding / long socket type
90° bend R=1.5D
90° bend with one straight end R=1.5D
45° bend R=1.5D
45° bend with one straight end
90° elbow R=1D
90° elbow with one straight end - R=1D
45° elbow R=1.5D
90° elbow with one straight end - R=1D
45° elbow with one straight end - R=1D
Preformed tube bridge
Reducers
Equal T-fittings
Reducing T-fittings
T-fittings with female threaded outlet DIN EN 10226-1:2004 (old DIN 2999)
Sockets with internal and external thread DIN EN 10226-1:2004 (old DIN 2999)
Sockets with bolt with internal thread DIN EN 10226-1:2004 (old DIN 2999)
Angular fittings with internal thread DIN EN 10226-1:2004 (old DIN 2999)
Angular sockets with internal and external thread DIN EN 10226-1:2004 (old DIN 2999)
STAINLESS STEEL CYLINDRICAL VALVES WITH INTERNAL THREAD (RP)
DIN EN 10226-1:2004 (old DIN 2999) / DIN 259. Flanged or weld ends.
Ball valves
Ball valves with flanges
Straight and oblique sleeve valves
Non-return valves
Plug valves
Y-valves
Needle valves
